uhryniuk
4aa5da53d2
Removes the *.hex/maps_cache gitignore rule (explicit user call, reversing the earlier no-redistribution stance) so the official TuneECU catalogue maps, derived SAI/O2-delete composites, and the checksum/composition tooling are actually available to pull up on a phone browser when using the real TuneECU app. Also folds in tonight's KWP2000 fixes (TesterPresent keep-alive, connect-failure cleanup, slow-init StartCommunication fix) and the accumulated research docs. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01FP2GaxS9HkUdL5sLBnjKje
16 lines
818 B
Plaintext
16 lines
818 B
Plaintext
Connecting on /dev/cu.usbserial-A50285BI via kline, target 0xD5 source 0xF5, fast init...
|
|
Attempt 1/3 failed (timed out waiting for 1 bytes, got 0 (none)); retrying in 5s...
|
|
Attempt 2/3 failed (timed out waiting for 1 bytes, got 0 (none)); retrying in 5s...
|
|
|
|
Connection failed after 3 attempt(s): timed out waiting for 1 bytes, got 0 (none)
|
|
|
|
Things to check, in order:
|
|
1. Ignition on, engine off. The ECU sleeps otherwise.
|
|
2. Diagnostic connector pinout -- confirm before suspecting anything else.
|
|
3. Try --init slow (5-baud) if fast init times out.
|
|
4. If retries didn't help, the ignition may need a real power cycle --
|
|
turn it off, wait a few seconds, back on, and re-run.
|
|
5. On an ELM327 clone, KWP support is often broken; try the KKL cable.
|
|
|
|
(full session log: logs/tunie-info-20260822-142418.txt)
|