Reversed the device-flag mechanism (l.java lc() + ee bit logic) and validated the
flag locations against a real reference map: 20188Map2009AIRBOXBONNY (explicitly
"NO SAI, NO O2 SENSORS"). Diffing its flat ROM vs stock 20188 isolated exactly
three byte-boolean flags that flip 1->0:
0x53801 SAI (= base + fe[33] + 0x00)
0x53818 O2 sensor (+ 0x17)
0x53819 O2 sensor (2) (+ 0x18)
1 = enabled, 0 = disabled. Neither stock map could reveal these (both have SAI+O2
on); the delete map was the key. See research/reference-maps/DEVICES.md.
Viewer: the Triumph-tables tab now has a Device flags panel — checkboxes reflect
the loaded map's real state (stock: all on; delete map: all off), toggling flips
the byte, and "Export edited .hex" re-encodes the distribution format. The
decode->edit->encode round-trip is byte-exact (verified). The caXX header bytes
are map-ID metadata, not a cal checksum; the ECU-flash checksum is applied at
write time.
Fixes from the first real ride: live current-speed readout and a ticking
elapsed clock on the recording screen, and a map that renders streets on
short rides (the zoom was clamping past OSM's maximum tile zoom).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Reversed the inner map format from l.java (Nc/Lb) and validated it against the
stock reference maps:
- reconstruct_rom.py: decoded map -> unpack directory -> 384KB flat ROM. In the
flat ROM, production (20187) vs aftermarket (20188) differ only 1.4% (vs 96%
packed), i.e. real fuel enrichment.
- table_map.py + TABLES.md: fe = c.a[Qd*48]; base = (fe[0]&0x2F0)<<12 = 0x50000;
table = base + fe[k]. Located 9 tables (main/low-throttle fuel per cylinder,
base/idle fuel, ignition by gear x4), 32 RPM rows x 20 throttle cols, with real
axes (RPM fe[8], throttle fe[27]) and the AFR curve (fe[2], 128=lambda 1.00).
Validated: main-fuel delta is uniformly richer in the aftermarket map.
Viewer now has a "Triumph tables" tab: drop a real .hex (or pick two) and it
decodes, unpacks, and renders the fuel/ignition tables as heatmaps with real
axes, plus an A->B difference view. build_viewer.py embeds the c.a/s.a directory
so any map resolves in-browser.
Catalogue dropdown: download_maps.py fetches map .hex files into maps_cache/;
serve.py serves the viewer over http so the dropdown can fetch them (drag-and-drop
still works on file://).
Proprietary map binaries (*.hex, *.dec.bin, maps_cache/) are gitignored — code and
docs only.
Trips, pause/resume/discard, path rendering on an OpenStreetMap base
layer, ride statistics, and GPX/GeoJSON export.
Debug build signed with the debug key, so it installs directly via
adb install or a file manager. Note this schema is not compatible with
the 1.0 APK's database - v2 starts from a clean slate.
com.rippr / versionCode 1 / minSdk 26 / targetSdk 35
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Reverse-engineered the Triumph Keihin map format from the TuneECU loader
(l.java zc/sc/Nc) and data classes c/r/s/t.java, and turned the viewer's table
tab into a working editor.
extract_mapdefs.py pulls the table directory out of the decompiled app into
mapdefs.json: r.a/s.a/t.a (calibration directory, 8-int records keyed by the
map's offset-20 signature) -> c.a (48-int calibration metadata) -> c.b (32-int
groups = 16 offset/length pairs each), yielding 413 candidate table offsets.
FORMAT.md documents the header magic (0x18008060 masked), the directory chain,
and the write-back checksum.
The viewer now edits: pick a known table offset (or set it manually), toggle
edit mode, click a cell to change its value, and the bytes are rewritten with
the running 16-bit checksum patched by (old - new) exactly as TuneECU does,
then Download the modified copy. Verified: editing 2016->9999 with the checksum
word at 0 yields 57553 = (0 + 2016 - 9999) & 0xffff.
Geometry offsets are read-confident but not yet validated against a real map
binary; FORMAT.md flags this. Editing/checksum stay local to a downloaded copy;
the flash write path remains out of the read-only tunie tool.
A single double-click-to-open HTML viewer (no server, no external refs) with
three tabs: browse/filter the 1811-map catalogue (with a "my bike" filter for
mechanical-odo Keihin Bonneville maps), see TuneECU's full editable surface
(tunable parameters, table axes, toggleable devices with SAI/O2/exhaust flagged
as mod targets, live sensors, actuator tests) extracted from the APK resources,
and a drag-drop .bin/.hex table viewer that renders bytes as a configurable
heatmap grid + hex dump for when a ROM dump lands.
build_viewer.py regenerates the HTML from arrays.xml + maps.json.
A Python tool to safely read the Keihin ECU on a 2010 Bonneville T100 over
K-Line (KKL cable) or a Bluetooth ELM327, plus the reverse-engineering research
behind it. Phase 1 (read-only comms) of an open tuning toolchain to replace the
closed TuneECU app.
Read-only by construction: safety.assert_read_only() runs on every outbound
request before it hits the wire and refuses all write/flash services (0x27,
0x31, 0x34/0x36, 0x35, 0x37, 0x14, 0x11, 0x2E) and programming sessions, so a
bug cannot brick the ECU. Verified frames match TuneECU byte-for-byte in
tests/verify_protocol.py.
Protocol constants recovered from the TuneECU APK (not guessed): ECU address
0xD5, K-Line tester 0xF5, format byte 0x80|len, additive mod-256 checksum.
Includes the full TuneECU map catalogue (1811 entries) extracted to maps.json,
searchable and filterable by ECU type and mechanical-vs-LCD odometer.
research/ documents the Security Access seed/key algorithm, recovered as
standard AES-128 (three embedded keys), with a self-testing reference impl
verified against FIPS-197. This is write-path material, kept outside the
read-only package.
STATUS.md and README.md capture full context, the risk register, and where we
left off: comms built but not yet run against the bike; next step is wiring the
VAG KKL cable to the Triumph connector and running the first scan.
Motorcycle ride telemetry recorder: foreground service records GPS to a
local Room database and streams batches to a REST endpoint when one is
configured. Debug build, signed with the debug key so it installs directly
via adb install or a file manager.
com.rippr / versionCode 1 / minSdk 26 / targetSdk 35
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
